Wild Stone LM is a high resistance professional adhesive with no vertical slip for natural or artificial stone and brick slips for both floor and wall applications.
Available in grey and white; White is recommended for all types of white stone veneers to eliminate grey joints between the stones.
Consumption: 4-8kg per ㎡
Limitations: Apply the product with temperature between +5℃ and +35℃.
Do not wash or expose to rain or direct sunlight for at least 48 hours. For further information consult the relevant technical data sheet or contact us. Store in a dry place.
Wild Stone SH is a mortar for grouting natural or artificial stone veneers or slips. It’s featured by nice aesthetic aspect, good efflorescence resistance and low water absorption.
Available cream, grey and dark grey with coverage from 4-12 kg per ㎡ depending upon joint width.
Limitations: Apply the product at temperatures between +5℃ and +35℃ and do not expose to rain or direct sunlight for at least 24 hours.
For further information consult the relevant technical data sheet or contact us.
Store in a dry place.
Stonesil Aqua is a water-repellent coating for stone veneer and brick slips. It can be applied to natural and artificial stone and does not deposit a gloss finish on the surface and does not change the appearance of materials. Designed for the impregnation of inorganic surfaces against water penetration.
Dispersion primer designed for the preparation of base materials for Wild Stone veneers and slips.
The coating is suitable for the treatment of non-absorbent, smooth and dense base materials with residues of adhesives and asphalt. Thanks to special additives it creates an adhesion bonding layer on the base material, increasing the adhesion of cement materials. Ready for direct application.
Use: depends on the base material, 0.15 - 0.3 kg per ㎡.